10000 Lbs, 2 post lift

Home > 2 Post Lifts >

Alternative Views:

Best Prices in the Web!!

List Price: $2,299.00
Our Price: $2,199.00
Sale Price: $2,249.00
You save $100.00!

Availability:: Usually Ships in 24 to 48 Hours
Product Code: AUT-TPO310

Qty:

Description

Technical Specs

Extended Information

After years of research we have here our best seller lift, the AUT-TPO310 is the perfect choice for those customers who demand the most lifting capacity at the lowest possible price. This is a clear floor lift configuration.

The AUT-TPO310 includes: a complete set of solid truck adapters, mounting hardware, and a SpxÂ® 220 volt single phase power unit that can be mounted on either side of the lift.

Many customers do not have access to loading docks and forklifts. Please ask us for some advise to unload a lift from the truck without forklift. Many of our freight carriers have truck liftgateson their delivery trucks. There may be an extra charge for the use of the liftgate, depending on the carrier. The power tailgate is normally rated at 1,250 LB. capacity. This is not enough capacity to unload most of our lifts. However, when used properly (and safely), the power tailgate (in conjunction with a engine crane) allows the customer to off load many of our products without the use of a forklift.

The AUT-TPO310 has a single point Release system, this mean that pushing the release bar beside the power unit the automatic lock is released in both columns, making the unload of the lift much more safe and fast that the dual point release.

What mean symetric post and asymetric arms?, the AUT-TPO310 has a symmetric column configuration that offers the widest possible space between posts to allow easy access to both sides of the vehicle, and two additional lifting pads that offer an infinite amount of lifting points for the rear lift arms.

NO CHAINS AND NO ROLLERS, The AUT-TPO310 has the Direct Lift System that eliminates the use of chains and pulleys to give a extra security to the lift operation, taking out aditional unnecesary parts in the lift.

The electric motor for the power unit requires 220 Volt (single phase) 60 Hz. We recommend using at least a 10 gauge (grounded) wire from the electrical panel. The power unit has a short pigtail (no plug) that can be wired to either a quick disconnect box (mounted on the lift column) or to a male/female plug combination. A 30 amp breaker is recommended.
Most of our above ground lift customers install their own car lifts. The average time to install the AUT-TPO310 car lift is four hours. We provide detailed installation instructions with all of our above ground lifts.

Warranty and parts?
No problem, we manage our own parts department, if you require a part for your AutoTool lift we have in stock to delivery to you inmediatelly, we only require the bad part to be returned to us.

Features

2 Post Asymmetric,10,000 lbs Lift
10,000-pound lifting capacity
Symetric-Asymmetric design
2 piece columns
Single point safety release
Dual hydraulic "Direct-Drive" cylinders
Drop-end arms provide a lower pad height
Double-telescoping arms provide increased range for lifting point access
Spx Electric/hydraulic power system
Large steel base plates
Self-lubricating polyethylene bearing system
Safety locks in each column spaced every 3-inches
Automatic arm restraints
Heavy-duty dual 3/8" equalizer cables with oversize cable sheaves
Padded overhead safety-shutoff bar
Truck and van adapters standard

Share your knowledge of this product with other customers... Be the first to write a review

Browse for more products in the same category as this item:

2 Post Lifts

	9,000 Lbs, 2 post lift, Floor Plate $1,499.00
	9000 Lbs 2 post Assymetric Lift $1,499.00
	Rolling Jack, 6000 Lbs for alignment lift $1,185.00
	6,000 Lbs, Low Rise Portable Lift $1,499.00
	12,000 Lbs, Alignment, 4 post lift, open front $5,862.00
	12,000 Lbs, 4 post lift $2,725.00
	Tilt Arm 26" Tire Changer $2,250.00
	Oil Drainer $155.00
	Swing Arm Tire Changer 26" $1,895.00

Join our mailing list!